【アクションカム】GoProシリーズr89【ウエアラブル】

名無しさん＠お腹いっぱい。

解説動画出している人いてLabs更新気がついた
https://youtu.be/mMi_Yz_cBLM

最大シャッター角度
HERO8/9/10/MAX - Set the Max Shutter Angle for control over stabilization in low light
https://gopro.github.io/labs/control/

10のLabs新機能
https://gopro.github.io/labs/control/extensions/
NEW - HERO10 only - Advanced features: December 2021 Labs 1.20.70
24HZ=1 - enable film standard 24.0 frame, rather than the default broadcast standard 23.976. The existing 24p mode(s) will have the new frame rate when this is enabled, all other video modes are unaffected.
DAMP=0.1 to 1000 - Control over the auto-exposure damping. When moving a camera through dramatically changing lighting, like biking through a forest, in and out of sunlight, or flying a drone through a short tunnel, the exposure will adjust automatically, correctly in most scenarios, but sometimes not optimal for some rapidly changing light levels. The camera’s auto-exposure currently takes about one second to adjust from sunlight to indoor conditions, but if you are flying a drone through indoors for only a few seconds, the camera would over-expose on exit. In this scenario using an exposure lock might be preferable, maintaining an outdoor exposure throwout, but exposure lock is risky for shooting under variable lighting conditions. Changing the damping might be what you need. Setting the DAMP=1 is the default, so setting to 10 would slow the camera’s exposure adjustments 10X. Now shooting into dark for moment will not cause much over-exposure (if any). Setting DAMP=60 will take a minute for exposure changes. Setting DAMP lower than 1, like 0.2, would make it adjust faster. There is no perfect setting, this is just more control.
TONE=0,1,2 or 3 - Tone-mapping controls. Tone-mapping is the in-camera contrast control, dynamically adjusting the video to look good under a range of lighting conditions. HERO10 adds LTM - Local Tone-Mapping, enabling you to see details in leaves and grass textures, way better than all previous GoPro’s. HERO9 and earlier, used GTM, Global Tone-Mapping which adjusts the contrast curve for the image automatically. If you wanted to do these in post, you could use Protune Flat, where all in-camera tone-mapping is disabled and a log curve is applied. For a more developed Rec709 video, by shooting GoPro Color or Natural modes, but you wanted to do your own tone-mapping in post–you can now do that.
TONE=0 - using the cameras default
TONE=1 - use GTM only
TONE=2 - use GTM+LTM
TONE=3 - disable all tone-mapping